為保證發電機組正常的運作和有長的使用期限，優良的維護保養是重要。那麼我們在維護保養前必須做那些提前準備呢？要認真地實行擠出機螺桿壓縮機組的維護保養技術規范。在下手開展維護保養以前，最少搞好下述提前準備：
To ensure the normal operation and long service life of the generator set, excellent maintenance is important. So what preparations must we make in advance before maintenance and upkeep? We must conscientiously implement the technical specifications for maintenance and upkeep of the extruder screw compressor unit. Before starting maintenance, at least make the following preparations in advance:
1.一定要先斷開機箱電源并在電源總開關處放上標示。
1. Be sure to first disconnect the chassis power and place a label at the main power switch.
2.關掉通往供氣系統軟件的截止閥門防止空氣壓縮逆流回被維修的一部分，一定不必借助本產品來防護供氣系統軟件。
2. Turn off the shut-off valve leading to the gas supply system software to prevent air compression from flowing back to the repaired part. It is not necessary to use this product to protect the gas supply system software.
3.開啟手動式放空閥，排盡體系內的工作壓力，維持放空閥處在打開情況。
3. Open the manual vent valve, exhaust the working pressure in the system, and maintain the vent valve in an open position.
4.針對水冷散熱機器，務必關掉供水設備，釋放出來自來水管路工作壓力。
4. For water-cooled heat dissipation machines, be sure to turn off the water supply equipment and release the working pressure of the tap water pipeline.
5.保證壓縮機組已制冷，避免燒傷.燒灼。
5. Ensure that the compressor unit has cooled down to avoid burns and burns.
6.擦干凈路面油痕.水漬，避免摔倒。
6. Clean the oil and water stains on the road surface to avoid falling.
在修理時這四點一定要留意：
When repairing, these four points must be noted:
1.不必認為機器關機，就覺得需要開展維修，維護保養工作中，機器的全自動自動控制系統隨時隨地會運行壓縮機。
1. There is no need to think that the machine is shut down, just because it needs to be repaired. During maintenance work, the fully automatic control system of the machine will run the compressor anytime and anywhere.
2.欠佳的維護保養不但會直接影型槽模具 一次性止血帶 保定水處理設備 一次性止血帶 保定空壓機 北京真空泵響發電機組的常規運作，并且還有可能危害實際操作工作人員的安全性。
2. Poor maintenance not only directly affects the normal operation of the generator set, but also may endanger the safety of actual operating personnel.
3.在壓縮機運作或帶壓時，不必拆裝螺帽.給油塞及其其他零件。
3. When the compressor is operating or under pressure, it is not necessary to disassemble nuts, oil plugs, and other parts.
4.不能應用易燃性有機溶劑，如車用汽油或汽油清理空氣過濾網或別的零部件。
4. Do not use flammable organic solvents, such as gasoline or gasoline for cleaning air filters or other components.
