滑片式壓縮機空壓機原理
Principle of sliding vane compressor
滑片式壓縮機采用傳統的技術，以較低的速度直接進行驅動。轉子是連續運行的部件,上面有若干個沿長度方向切割的槽，其中插有可在油膜上滑動的滑片。
The sliding vane compressor adopts the traditional technology to drive directly at a lower speed. The rotor is a continuously running component, which is provided with a number of grooves cut along the length direction, in which sliding plates that can slide on the oil film are inserted.
轉子在氣缸的定子中旋轉,在旋轉期間,離心力將滑片從槽中甩出，形成一個個單獨的壓縮室,旋轉使壓縮室的體積不斷減小，空氣壓力不斷增大,通過注入加壓油來控制壓縮產生的熱量, 進而就完成了對空氣的壓縮。
The rotor rotates in the stator of the cylinder. During the rotation, the centrifugal force throws the sliding plate out of the slot to form individual compression chambers. The rotation reduces the volume of the compression chamber and increases the air pressure. By injecting pressurized oil to control the heat generated by compression, the air compression is completed.
